Enquiry Form
Need Help? Write Us  mail icon  contactus@machineadda.com

 

1 X CibiTex Finishing Range • Make : CibiTex • Year : 1995 • Roller Width mm : 2000 • Fabric Width (mm) : 1800 • Renovation : Fully redone in all aspects by CIBITEX in 2014 • Consisting of : Singeing, Washing, Drying, Shrinkage • Singeing : Entry frame, J Box, Brushing with dust remover unit, Natural gas singeing with 2 burners • Washing : Impregnator tank with squeezer, Weft skewing, High tension compensator • Drying : 2 columns of 8 rollers can dryer, Can dia 800 mm • Shrinkage : Clip expander stenter, Rubber belt shrinkage unit, Grinding unit, 2000 mm dia felt calendar, 800 mm dia dryer roll, 2 nos 640 mm dia cooling rolls, Delivery J Box, Surface winder • Others(Specify) : Rubber and Felt belt installed brand new (one set of old belts given as spare), Synchronisation device through dancing roller, Humidity device, Spare parts package

Contact Supplier   View Details
6462/R7-2 X Bruckner Stenter
Product ID : OM15336

2 X Bruckner Stenter • Make : Bruckner • Year : 1988 • Heating Source : Oil • Fabric Width (mm) : 2400 • Weft Straightener : Not Available • Chain Section : Vertical Pin • No Of Chambers : 5 • Type Of Winding : Plaiter • Roller Width (mm) : 2600 • Padder : Available

Contact Supplier   View Details
6511-1 X Lutan Lutan Sizing
Product ID : OM15335

1 X Lutan Lutan Sizing • Make : Lutan • Model : Lutan • Year : 2006

Contact Supplier   View Details

2 X Picanol Gamma 8R Rapier Weaving • Make : Picanol • Model : Gamma 8R • Year : 2000 • Working Width in cm : 190 • No Of Colors : 8 • Shedding Motion : Dobby • Shedding Motion Make : Staubli • Shedding Motion Type : Electronic • Shedding Motion Model : 2861 • Shedding Motion Installed Capacity : 22 • Take-Up Motion : Electronic • Let-off Motion : Electronic • Selvedge Type : Leno • Temple Type : Normal • No of Back Rest Roll : 2 • No of Frames Supplied : 6 • No of Heald Wire Supplied/Set : 6000 • No of Dropper Supplied : 6000 • No of Warp Beam Supplied : 1.5 • Cloth Take-Up Type : On-loom • No of Cloth Roller Supplied : 1.5

Contact Supplier   View Details

1 X Thies Jet Dyeing Machine

• Make : Thies

• Year : 1991

• Capacity (kgs) : 20

• Controller : Sedo PC 1000

Contact Supplier   View Details

8 X Toyoda RXI 240 Ring Frame With Autodoffer

• Make : Toyoda • Model : RXI 240 • Year : 2012 •

Doffing : Automatic • No of Spindle : 1056 • Spindle Gauge mm : 70 • Bobbin Length mm : 180 • Drafting Type : PK2025 • Cradle Size in mm : Short - 36 • Top Clearer Roller : Available • Bottom Roll Dia in mm : 27/27/27 • Ring Dia mm : 38 • Spindle Type : Plug • Spindle Wharve mm : 18.5 • Spindle Drive : 4 spindle drive • ABC Ring : Available • Pneumafil Suction : Individual Tube • Yarn Cutting : Spindle • Bobbin Conveying : Peg Tray • OHTC Make : Electrojet • Motor kW : 65 • Inverter : Available • Exhaust air : Downwards

Contact Supplier   View Details

6 X Rieter G30 Ring Frame With Autodoffer • Make : Rieter • Model : G30 • Year : 1995 • Doffing : Automatic • No of Spindle : 1008 • Spindle Gauge mm : 70 • Bobbin Length mm : 220 • Drafting Make : Rieter • Drafting Type : P3-1 • Cradle Size in mm : Short - 36 • Bottom Roll Dia in mm : 27/27/27 • Ring Dia mm : 42 • Ring Flange : One • Spindle Type : Plug • Spindle Drive : 4 spindle drive • No of Creel Rows : 6 • Bobbin Conveying : Peg Tray • OHTC : Available • OHTC Make : Luwa • Inverter : Available • Type : Delinked and No Tube Loader

Contact Supplier   View Details
TEXTILE MACHINE
Product ID : OM15324

Muratec QPRO

Type : QPRO ( with Perla A - Automatic - Compatible with lycra ) 180mm-220mm Bobbin

Year:2013

60 Unit 5.57 inch Conical Loepfe Zenit C Air Splace Splicer ( G2Z )

Year : 2013 

Status : Running

Contact Supplier   View Details

6 X Rieter G30 Ring Frame With Autodoffer • Make : Rieter • Model : G30 • Year : 1995 • Doffing : Automatic • No of Spindle : 1008 • Spindle Gauge mm : 70 • Bobbin Length mm : 220 • Drafting Make : Rieter • Drafting Type : P3-1 • Cradle Size in mm : Short - 36 • Bottom Roll Dia in mm : 27/27/27 • Ring Dia mm : 42 • Ring Flange : One • Spindle Type : Plug • Spindle Drive : 4 spindle drive • No of Creel Rows : 6 • Bobbin Conveying : Peg Tray • OHTC : Available • OHTC Make : Luwa • Inverter : Available • Type : Delinked and No Tube Loader

Contact Supplier   View Details
6676/R2-4 X Howa RME Simplex
Product ID : OM15313

4 X Howa RME Simplex • Make : Howa • Model : RME • Year : 1990 • No of Spindles : 120 • Staff Length in mm : 520 • Flyer Type : Closed • Flyer Size : 16" X 6" • Drafting Make : PK1500 • Top Positive Clearer : Available • Bottom Positive Clearer : Available

Contact Supplier   View Details
6605/R1-14 X Rieter F5 Simplex
Product ID : OM15312

12 X Rieter F5 Simplex • Make : Rieter • Model : F5 • Year : 1994 • No of Spindles : 120 • Staff Length in mm : 520 • Flyer Type : Closed • Flyer Size : 16" x 6" • Drafting Make : PK1600 • Drafting Type : 3 Over 3 • Cradle Size : Short • No of Creel Roll : 5 • Motor kW : 11 • Inverter Drive For Main Motor : Available • OHTC Make : Luwa

Contact Supplier   View Details

1 X CibiTex Finishing Range • Make : CibiTex • Year : 1995 • Roller Width mm : 2000 • Fabric Width (mm) : 1800 • Renovation : Fully redone in all aspects by CIBITEX in 2014 • Consisting of : Singeing, Washing, Drying, Shrinkage • Singeing : Entry frame, J Box, Brushing with dust remover unit, Natural gas singeing with 2 burners • Washing : Impregnator tank with squeezer, Weft skewing, High tension compensator • Drying : 2 columns of 8 rollers can dryer, Can dia 800 mm • Shrinkage : Clip expander stenter, Rubber belt shrinkage unit, Grinding unit, 2000 mm dia felt calendar, 800 mm dia dryer roll, 2 nos 640 mm dia cooling rolls, Delivery J Box, Surface winder • Others(Specify) : Rubber and Felt belt installed brand new (one set of old belts given as spare), Synchronisation device through dancing roller, Humidity device, Spare parts package.

Contact Supplier   View Details
6462/R7-2 X Bruckner Stenter
Product ID : OM15310

2 X Bruckner Stenter • Make : Bruckner • Year : 1988 • Heating Source : Oil • Fabric Width (mm) : 2400 • Weft Straightener : Not Available • Chain Section : Vertical Pin • No Of Chambers : 5 • Type Of Winding : Plaiter • Roller Width (mm) : 2600 • Padder : Available

Contact Supplier   View Details

6 X Rieter G30 Ring Frame With Autodoffer • Make : Rieter • Model : G30 • Year : 1995 • Doffing : Automatic • No of Spindle : 1008 • Spindle Gauge mm : 70 • Bobbin Length mm : 220 • Drafting Make : Rieter • Drafting Type : P3-1 • Cradle Size in mm : Short - 36 • Bottom Roll Dia in mm : 27/27/27 • Ring Dia mm : 42 • Ring Flange : One • Spindle Type : Plug • Spindle Drive : 4 spindle drive • No of Creel Rows : 6 • Bobbin Conveying : Peg Tray • OHTC : Available • OHTC Make : Luwa • Inverter : Available • Type : Delinked and No Tube Loader

Contact Supplier   View Details
Power looms machine
Product ID : OM15108

Mansuri company power looms machine capacity 250 garments produce weight 900 kg height 4 feet length 9 feet width 4.5 feet 56" size.

Contact Supplier   View Details

4 X Schlafhorst SE9 Open End Spinning • Make : Schlafhorst • Model : SE9 • Year : 1994 • Type : ACO288 • No of Rotors : 240 • Yarn Clearer Make : Uster Quantum • Piecer Carriage : 2 • Opening Roller Type : B174 • Rotor Type : G330 • Length Measuring : Available • Type of Spinbox : SE9 • Delivery Package : Cheese • Conicity : Cylindrical • Waxing : Available • Coro Shuttle : 1 • Inverter Main Motor : Available

Contact Supplier   View Details

4 X Murata 7-V Mag AutoWinder • Make : Murata • Model : 7-V Mag • Year : 1997 • Type of Feed : Magazine • No of Drums : 60 • Yarn Clearer Make : Uster Polymatic • Measuring Head Type : MK C15 B2 • Drum Type : Steel • Drum Turns : 2.5 • Traverse : 6" • Splicer Nozzle : G2Z • Waxing : Available • Conicity : 5°57' • Empty Tube Conveyor : Available • Suction : Individual

Contact Supplier   View Details

20 X Schlafhorst SE9 Open End Spinning • Make : Schlafhorst • Model : SE9 • Year : 1993 • Type : ACO288 • No of Rotors : 240 • Yarn Clearer Make : Corolab • Piecer Carriage : 2 • Opening Roller Type : B174 • Rotor Type : G330 • Length Measuring : Available • Type of Spinbox : SE9 • Delivery Package : Cheese • Conicity : Cylindrical • Waxing : Available • Coro Shuttle : 1 • Inverter Main Motor : Available

Contact Supplier   View Details

5 X Rieter G33 + Ring Frame With Autodoffer Linked To AutoWinder • Make : Rieter • Model : G33 + • Year : 2006 • Doffing : Automatic Link • Special Attachment : Lycra • No of Spdl / Mc : 1008 • Spindle Gauge mm : 70 • Bobbin Length mm : 190 • Drafting Make : Rieter • Drafting Type : P3-1 • Cradle Size in mm : Short – 36 • Bottom Roll Dia in mm : 27/27/27 • Ring Dia mm : 38 • Ring Make : Bracker • Spindle Type : Plug • Spindle Wharve mm : 18.5 • ABC Ring : Available • No of Creel Rows : 5 • Yarn Cutting : Spindle • Bobbin Conveying : Peg Tray • OHTC : Available • Motor kW : 55 • Inverter : Available • Exhaust air : Downwards

Contact Supplier   View Details

13 X Rieter G35 Ring Frame With Autodoffer Linked To Murata 21C AutoWinder • Make : Rieter • Model : G35 • Year : 2010 • Doffing : Automatic Link • No of Spdl / Mc : 1632 • Spindle Gauge mm : 70 • Bobbin Length mm : 190 • Drafting Make : Rieter • Drafting Type : P3-1 • Bottom Roll Dia in mm : 27/27/27 • Ring Dia mm : 1 X 38, 10 X 38, 2 X 40 • Ring Flange : One • Spindle Type : Plug • Spindle Wharve mm : 18.5 • Spindle Drive : 4 spindle drive • ABC Ring : Available • No of Creel Rows : 6 • Yarn Cutting : Spindle • Bobbin Conveying : Peg Tray • OHTC : Available • OHTC Make : Electrojet • Motor kW : 80 • Inverter : Available • Exhaust air : Downwards Linked to : Murata 21C AutoWinder • Type of Feed : Link • MC Hand : 6 X RHS, 7 X LHS • No of Drums : 1 X 36, 4 X 35, 4 X 42, 1 X 43, 3 X 44 • Yarn Clearer Make : Uster Quantum 3 • Measuring Head Type : R-iMH C20/F30 • Drum Type : Steel • Drum Turns : Multy Drum • Traverse : 6″ • Splicer Nozzle : G2Z • Balcon Type : Available • Waxing : Available • Conicity : 4°20′ • MMM : Available • Doffer : 1 • Empty Tube Conveyor : Available • Package Conveyor : Available • Suction : Individual • Hot Air Discharge : Downward • Suction Motor kW : 15 • Front Plate Splicer : FB1 • Tension Type : Finger

Contact Supplier   View Details
123
All Rights Reserved.@ copyright machineadda.com